Tune-up (Clean, Oil & Adjust Service)

Your Tune-up  includes cleaning your machine, inside and out; proper oiling and lubricating of your machine according to the manufacturer’s specifications; and adjusting and checking the machine’s settings against factory standards. Our technician will also inspect for any unusual or excessive wear on the machine’s internal parts. This includes the following general service points listed below.

29 Points of General Service

1. Clean inside of machine
2. Oil machine
3. Check motor
4. Check foot control
5. Check connection
6. Check belt
7. Check pulley
8. Check handwheel
9. Check bobbinwinder
10. Check spool holder
11. Check cam stack gear
12. Check tension unit
13. Check needle bar
14. Check presser foot bar
15. Check hook driver
16. Check feed dog
17. Check needle front to back
18. Check needle position
19. Check zig zag swing
20. Check hook
21. Check backrun/timing
22. Check needle height
23. Check needle hook clearance
24. Adjust bobbincase tension
25. Adjust top tension
26. Adjust straight stitch
27. Adjust zig zag
28. Adjust thread regulator
29. Clean outside of machine

The following items are not checked unless you mention a concern:

• Bobbin Winding
• Knee Lifter
• Buttonhole
• Other Stitches

What should you bring with your machine for Clean, Oil & Adjust service?

• Foot pedal
• Presser foot #1 or universal foot
• Power cord
• Bobbin
• Bobbin case

*Please do not bring any spools of thread with your machine to be serviced. Our technician uses a special thread to check your machine, and this eliminates confusion of having extra items.

Other Machine Services